Apc Network Management Utility Cd

Issue An APC Network Management Card must be configured with network settings before it can communicate on the network. Once the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and controlled from other computers on the network. There are multiple configuration options available, outlined below, for each family of Network Management Cards or devices that have embedded versions of these products. Product Line • Web/SNMP Card - AP9606.

Devices with an embedded Network Management Card 2 include (but are not limited to): 2G Metered/Switched Rack PDUs (AP84XX, AP86XX, AP88XX, AP89XX), Rack Automatic Transfer Switches (AP44XX), Certain Audio/Video Network Management Enabled products, Smart-UPS Online (SRT). Environment • All serial numbers • All firmware revisions (unless otherwise noted) • Unconfigured Network Management Card enabled Devices • Network Management Card devices requiring reconfiguration Cause A Network Management Card requires TCP/IP settings prior to being accessible accessible via a network. Resolution If you have a Network Management Card 1: In regards to Network Management Card 1 (AP9617, AP9618, AP9619) or devices with an embedded Network Management Card 1 (such as a AP78XX or AP79XX Rack PDU, Environmental Monitoring Unit, etc), there are three available options to configure the Network Management Card (NMC) with it's initial settings: the Wizard, terminal emulation (local/direct connection), and Address Resolution Protocol (ARP). Default boot mode: DHCP/BootP - With DHCP Option 43 Vendor Cookie required to accept DHCP Offer. By default, all of APC's Network Management Card 1 based devices are configured for a boot mode of DHCP/BOOTP. If using DHCP, a vendor cookie (DHCP Option 43) is required by default. If it is not configured on your DHCP server, the card will not accept an IP address.

Mar 06, 2009  Network Management Card Utility CD for APC SUA2200XL-NETPKG Discussion in Smart-UPS & Symmetra LX / RM started by Tom, 3/5/2009 4:25 AM Subscribe to RSS. Login to follow, share, and participate in this space. Not a member? Serial number garritan personal orchestra 5 torrent. Command and conquer generals zero hour cheats trainer. However I did not get the Network Management Card Utility CD.

You can use the methods below to configure/access the card if you do not wish to use DHCP/BOOTP. If you have a Network Management Card 2: Default boot mode: DHCP Only - With DHCP Option 43 Vendor Cookie NOT required to accept DHCP Offer. By default, all of APC's Network Management Card 2 based devices (such as a AP8XXX Next Gen Rack PDU ) with AOS 5.1.1 or higher, are configured for DHCP Only with no vendor cookie required by default. They will obtain an IP address automatically so you may need to refer to your DHCP server to find out what IP address it obtained.

All APC devices have a MAC address that begin with 00 C0 B7 which may help while reviewing your DHCP Client List. In order to configure your Network Management Card enabled device, please pick one of the available configuration methods listed below: • ​ • ​ • ​ • ​ • ​ The Device IP configuration wizard is included on the CD that comes with the cards (current v5.0.2) and the latest version is currently only (v5.0.2). The wizard must run on a Windows operating system.